Calculation of Maintenance Cost Based on the Proportional Life Setback Model

Maintenance cost is one of the most difficult parts to calculate in variant-cost, for it s decided by the reliability of components. As an important factor of reliability, life is largely affected by maintenance. The proportional life prolonged model based on maintenance is presented firsdy. Based on this model, the function of Mainenance--Life--Cost is deduced. Which provides a new method for power plant to calculate maintenance cost more accurately.     

游离棉纤维长度的计算机测量

文中介绍了一种棉纤维长度测量的新方法,即用CCD捕获游离棉纤维图像,然后依据数字图像处理及模式识别的理论,建立起一个实际可行的算法,来完成对棉纤维多种长度指标的一次性测量。该算法涉及到数字图像的二值分割、补断、修剪、像素跟踪等几个方面,且针对棉纤维图像的特征,进行了优化。     

尤溪县生态公益林林分改造的分析与对策

对尤溪县境内的闽江支流尤溪河两岸、道路两边及库区周边一重山的生态公益林现状及存在问题进行了分析，提出了对公益林部分林分进行改造的初步规划，探讨了公益林改造的对策，为尤溪县“两沿一环”（即沿高速公路、公路、铁路，沿河，环城区周边一重山）林分改造工程提供参考。     

拖拉机传动系加载磨合台测控技术研究

介绍拖拉机传动系加载磨合台的系统构成、软件设计、功能与创新之处。本磨合台采用电封闭结构,驱动电动机驱动被试传动系,被试传动系带动加载电动机,加载电动机产生的电能又返回驱动电动机,实现能量的循环利用。软件设计保证用户操作简单、稳定可靠。     

冬枣锈病发生与叶龄及其解剖结构关系的研究

为探讨冬枣叶龄、叶片解剖结构与锈病侵染和发病程度的关系，对冬枣3种不同叶龄的叶片进行锈病接种试验，并对叶片组织解剖结构进行了测定。结果表明：3种叶龄叶片感病程度由低到高依次为：成熟叶< 长成叶<嫩叶，由此可见，成熟叶对锈病的抵抗力最强；3种叶龄叶解剖性状在角质层厚度、上表皮厚度、下表皮厚度、叶片厚度、栅栏组织厚度、海绵组织厚度、栅海比、叶片结构紧密度、叶片结构疏松度、气孔密度和气孔大小等指标有显著差异，但气孔开张结构性状差异不显著。文章筛选出了与冬枣锈病发生有关的叶片形态结构指标，为合理的控制冬枣锈病和筛选抗锈病冬枣优良单株的提供了理论依据。     

大兴安岭林区林分蓄积量与海拔的关系研究

研究区域位于天然林保护工程重点区域大兴安岭林区,收集大兴安岭森林资源连续清查第6次复查232块样地资料,将其整理成列联表,做列联表分析,进行卡方检验、剩余分析、对数线性模型拟合。结果表明,此区域落叶松林分在低海拔分布较广,但蓄积量处于相对低水平,主要是此区域内林分受人为干扰较严重而致。本文研究结果对于森林经营决策具有重要的意义。     

两种林龄中山杉(Taxodium hybrid 'Zhongshanshan')林地土壤质量评价

以江苏省靖江市牧城公园和东湖公园两种种植年限分别为5 a和9 a的中山杉(Taxodium hybrid'Zhongshanshan')人工林土壤和无林地为研究对象,对0~15 cm、15~30 cm和30~45 cm深度土层土壤理化性质、养分含量和微生物生物量进行了分析。典型相关分析表明,土壤微生物生物量的变化是一个复杂的过程,是土壤各因子共同作用的结果,3种土壤U、V值均表现出层次性,随着土壤深度的增加逐渐降低;不同取样点相同深度土层U、V值为9 a林5 a林对照;单相关分析表明,土壤微生物生物量与速效磷、速效钾、有机质和全氮呈极显著正相关(P0.01),因此土壤微生物可以作为评价中山杉人工林在促进林地土壤质量改善过程中的重要生物指标;主成分分析表明,综合得分最高的9 a林为2.993,其次是5 a林为0.748,作为对照的无林地则为-3.742,说明9 a林地土壤质量最高。可见,中山杉对林下土壤质量有显著提高作用。     

Recreational preferences depending on thinning practice in young even-aged stands of pedunculate oak (Quercus robur L.): comparing the opinions of forest and landscape experts and the general population of Denmark

The aim of this study was to investigate to which extent forestry professionals, other “green” professionals (mainly landscape architects) and natural resource students in Denmark agree with the general population regarding their recreational preferences for contrasting stem densities in young, even-aged stands of pedunculate oak (Quercus robur L.). The study was based on five pairs of colour photographs from each of the five recently thinned experimental plots in a 13-year-old stand. The plots represented five different residual stem densities: 7000 (unthinned), 5300 (traditional thinning), 1000, 300 and 100 stems ha^?1. All cut trees were left on the ground. The analysis was carried out as a survey of forest and landscape experts (n=158) and the general public (n=243) based on questionnaires. Interviewees ranked the photographs according to the criterion: “Which forest environment do you prefer as a visitor?” Principal component factor analysis showed that the general public tended to perceptually group photos according to similar overall pattern of openness, presence of row structure and stand accessibility (including presence/absence of slash). As long as a stand appeared accessible, stand density had little influence on their preferences for a wide range of stand densities (5300?300 stems ha^?1). In contrast, foresters, other “green” professionals and students seemed to perceptually group photos according to treatment type, and the presence of slash had little influence on their preferences. This suggests an influence of professional background, making experts visually analyse and evaluate stands according to contemporary management standards and paradigms within their own profession.     

不同采伐强度对闽西常绿阔叶林林分结构稳定性的影响

应用多样性分析方法和改进后的 M.Godron 稳定性测定方法研究常绿阔叶林5种不同强度采伐(弱度9.8%、中度24.5%,强度46.8%和极强度72.3%和皆伐)作业10 a后林分结构稳定性.结果表明,择伐林地林分处于稳定状态,随着择伐强度的增强,林分的稳定性开始逐渐降低.皆伐林地林分处于不稳定状态.对于常绿阔叶林的科学经营,从稳定性出发,应尽量采取择伐方式,尤其是中低强度的择伐方式.